The 1M CAT8 shielded(SFTP) network patch cord provided Optiunik is the SFTP cable structure, plug and play, convenientand flexible, and the finished jumper test is strictly inaccordance with ANSI/TIA/EIA-568C.2
1. Support T568A(ISDN) and T568B (ALT) pin configuration;
2. RJ45 crystal oboe surface gold plated, to ensure very good contact and signal transmission performance;
3. Made by injection molding process, the wire is sealed and does not oxidize;
4. 100% factory test, can ensure the performance;
5. Meet the internationa standard ANS/TA/EIA-568B. IEC61156-5 5E and EN 50288-2-1 and TIA-568-C 2 and domestic standard YD/T1019-2013;
TESTING
Patch Cord Testing
Test the performance of patch cords and RJ45 plugs, including NEXT and RL. Ensure greater stability and durability.
Channel Testing
Test the connection between two devices, including any network and device cables, and detect parameters such as NEXT, ACR, etc. Ensure end-to-end network performance.
Permanent Link Testing
Test the fixed portion of the channel for trunk cables and bulk cables, excluding the patch cables or equipment cords at the ends, and detect parameters such as NEXT, ACR, etc. Ensure reliable transmission performance.
Network Testing
Measure network capacity, identify common faults, and troubleshoot active networks and PoE devices. Ensure normal network connectivity.
Application Environment
Quality Certifications
CAT8 Shielded UTP Network Patch Cord 2000MHz/40G PVC/LSZH
1. Support T568A(ISDN) and T568B (ALT) pin configuration;
2. RJ45 crystal oboe surface gold plated, to ensure very good contact and signal transmission performance;
3. Made by injection molding process, the wire is sealed and does not oxidize;
4. 100% factory test, can ensure the performance;
5. Meet the internationa standard ANS/TA/EIA-568B. IEC61156-5 5E and EN 50288-2-1 and TIA-568-C 2 and domestic standard YD/T1019-2013;
