Cat6 U/UTP unshielded network patch cord with internal cross-skeleton spline — the cost-effective choice for office and SMB structured cabling where 1 Gbps Ethernet is standard and 10GBASE-T may be needed in short runs. The plastic spline mechanically separates the four pairs to reduce near-end crosstalk and meet the Cat6 250 MHz channel-performance envelope.
Construction: 4 pairs of 23 AWG (or 24 AWG slim variant) bare-copper stranded conductors, internal cross-skeleton spline (FRP or polyethylene), flexible PVC or LSZH outer jacket. 8P8C plugs are 50µ"-gold-flashed with anti-snag strain-relief boot. Specifications per ANSI/TIA-568.2-D Category 6.
PoE++ (Type 4, 100W per port) rated thanks to the larger 23 AWG conductors. Jackets: PVC (indoor standard) and LSZH (plenum / riser); colors include blue, gray, black, white, green, yellow, red, orange. Lengths from 0.3 m to 30 m in 0.5 m increments; custom to 50 m. Each cable wire-map and continuity tested; channel performance verified per ANSI/TIA-568.2-D. Recommended for office workstations, IP cameras, VoIP phones, and access-layer enterprise networks.
